Monte Carlo V6-3.8L SC VIN 1 (2004)
Speaker: Service and Repair
Speaker Replacement - Rear
SPEAKER REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear window trim panel.
2. Disengage the speaker retaining tab. Remove the speaker alignment tabs from the opening in the rear window panel.
The speaker seal may have bonded with the shelf metal. Carefully pry the housing away from the metal while holding the speaker retaining tab in
order to remove the speaker.
3. Disconnect the electrical connector from the rear speaker.
4. Remove the rear speaker.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the rear speaker. Position the rear speaker to the rear window panel.