Monte Carlo V6-3.8L SC VIN 1 (2004)
Passenger Assist Handle: Service and Repair
Assist Handle Replacement - Front
Assist Handle Replacement - Front
Removal Procedure
1. Pull down on the assist handle.
2. Remove the plastic cover with a small, flat-bladed tool to expose the screws.
3. Remove the assist strap screws (1).
4. Remove the assist strap from the vehicle.
Installation Procedure
1. Install the assist strap to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the assist strap screws (1).
Tighten the screws to 2 N.m (18 lb in).
3. Install the plastic cover. Press the cover into place until fully seated.
