Monte Carlo V6-3.8L SC VIN 1 (2004)
2. Return the trim panels to the installed position.
3. Press the trim over the rear shock tower studs.
4. Install the push-in retainers in the trim panels.
5. Install the spare tire cover to the rear compartment.
6. Install the rear seat back.
7. If equipped, position the communication interface module and the bracket in the rear compartment.
8. Connect the GPS antenna cable by pushing in on the metal sleeve.
9. Connect the two lower connectors to the module.
10. Connect the cellular antenna by pressing in on the square plastic housing.
