Monte Carlo V6-3.8L SC VIN 1 (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement
GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR (MONTE CARLO)
REMOVAL PROCEDURE
1. Reposition the rear upper quarter trim panel.
2. Remove the windshield garnish molding from the clip retainers on the upper/roof side rail.
3. Remove the windshield garnish molding from the windshield pillar.
4. Remove the windshield garnish molding from the front door carpet retainer, pulling up and back.
5. Remove the windshield garnish molding from the vehicle.