Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Remove the seat belt from the rear upper quarter trim panel.
2. Remove the coat hook from the rear upper trim panel.
3. Remove the rear quarter upper trim in by disengaging the push-in retainers.
Installation Procedure
1. Align the rear quarter upper trim panel slotted retainers to the rear quarter lower trim panel.
2. Align the rear quarter upper trim panel push-in retainers to the rear quarter inner upper panel.
3. Install the rear quarter upper trim panel push-in retainers, applying pressure to secure at all push-in retainers locations.
4. Install the seat belt to the rear upper quarter trim panel.
5. Install the coat hook to the rear upper quarter trim panel.
Trim Panel Replacement - Rear Window Shelf
TRIM PANEL REPLACEMENT - REAR WINDOW SHELF (MONTE CARLO)
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the rear seat back.
3. Remove the rear upper quarter trim panel.
4. Remove the push-in retainers from the front of the panel.
5. Lift the rear window trim panel and remove the seat belts through the slots in the rear window trim panel.
6. Slide the rear window trim panel forward to disengage the tabs and remove the rear window trim panel.
INSTALLATION PROCEDURE