Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the exhaust muffler rear hanger bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the inboard and the outboard rear bumper impact bar bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the exhaust pipe rear hanger insulators to the exhaust muffler rear hanger bracket.
4. Remove the support from the exhaust system.
5. Inspect the exhaust system for underbody contact.
6. Lower the vehicle.