Monte Carlo V6-3.8L SC VIN 1 (2004)
19. Install the bolt to the right side fuse block.
Tighten
Tighten the bolt to 10 N.m (89 in lb).
20. Install the panel air duct to the cross vehicle beam.
21. Install the panel air duct screw (1).
Tighten
Tighten the screw to 1.8 N.m (16 lb in).
22. Install the panel air duct bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
23. Install the I/P lower trim panel.
24. Connect the battery negative cable.