Monte Carlo V6-3.8L SC VIN 1 (2004)
Power Steering Pump: Service and Repair
Power Steering Pulley
Power Steering Pulley Replacement
^
Tools Required
-
J 25033-C Power Steering Pump Pulley Installer
-
J 25034-C Power Steering Pump Pulley Remover
Removal Procedure
1. Remove the power steering pump assembly from the vehicle.
2. Using J 25034-C remove the power steering pump pulley from the power steering pump.
Installation Procedure
Important:
^
Never use a hammer to install the power steering pulley.
^
Do not use an arbor press to install the power steering pulley.
^
The face of the pulley hub must be flush with the end of the pump driveshaft.
1. Using J25033-C install the power steering pump pulley to the power steering pump.
2. Install the power steering pump assembly to the vehicle.
