Monte Carlo V6-3.8L SC VIN 1 (2004)
8. Remove the power steering pump.
9. Remove the power steering pump reservoir from the power steering pump.
10. Remove the power steering pump pulley from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
^
Tighten the mounting bolts to 34 Nm (25 ft. lbs.).
5. Install the power steering pressure hose to the power steering pump.
6. Install the power steering return hose to the power steering pump.
