Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Fuel Filler Door Release Cable Replacement: Removal Procedure
10. Remove the floor carpet retainers (1) from the left front and rear door sill flange.
11. Position the floor panel carpet aside to access the fuel tank filler door latch release cable.
12. Remove the fuel/rear compartment release handle housing bolt from the floor panel.
13. Remove the fuel tank filler door latch release cable from the fuel/rear compartment release handle housing.
14. Open the rear compartment lid.
15. Remove the plastic retainer and position the rear compartment side trim aside to access the fuel tank filler door latch release cable at the fuel tank
tiller door.
16. Remove the fuel tank filler door latch release cable from the fuel filler door.
17. Unclip the release cable from the retaining clips and remove the cable from the vehicle.
INSTALLATION PROCEDURE
Fuel Filler Door Release Cable Replacement: Installation Procedure
1. Install and route the fuel tank tiller door latch release cable to the vehicle. Secure the cable to the retaining clips.
2. Install the fuel tank tiller door latch release cable to the fuel tank filler door.
3. Reposition the left rear compartment side trim to its original position. Secure the trim with the plastic retainer.
4. Lower the rear compartment lid.
5. Install the fuel tank filler door latch release cable to the fuel/rear compartment release handle housing. Secure the housing with the bolt.
Tighten
Tighten the handle housing bolt to 10 N.m (89 lb in).
6. Reposition the floor panel carpet to its original position.
7. Install the floor carpet retainers (1) to the left front and rear door sill pinch flange.