chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Crossmember, Trans Support, Lower Control Arms, STAB Shaft Repl|Page 8785 > < Crossmember, Trans Support, Lower Control Arms, STAB Shaft Repl|Page 8783
Page 6
background image

17. Torque the two bolts (1, 2).

Tighten
Tighten the two transaxle support mounting bolts to 60 N.m (45 lb ft).

18. Torque the one bolt (6).

Tighten
Tighten the one bolt to 175 N.m (129 lb ft).

19. Torque the two bolts (2, 3).

Tighten
Tighten the two bolts to 225 N.m (167 lb ft).

20. Torque the two bolts (

5. 7).

Tighten
Tighten the two bolts to 147 N.m (109 lb ft).

21. Torque the one bolt (9).

Tighten
Tighten the one bolt to 175 N.m (129 lb ft).

22. Torque the two bolts (2, 3).

Tighten
Tighten the three bolts to 225 N.m (167 lb ft).

23. Torque the two bolts (8, 11).

Crossmember, Trans Support, Lower Control Arms, STAB Shaft Repl|Page 8785 > < Crossmember, Trans Support, Lower Control Arms, STAB Shaft Repl|Page 8783