Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Radiator Hose: Service and Repair
Radiator Hose Replacement-Inlet
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Start the engine. Run the engine for 15 minutes.
3. Stop the engine.
4. Open the drain plug on the radiator. Drain the coolant.
5. Loosen and reposition the hose clamp on the radiator inlet hose at the radiator.
6. Loosen and reposition the hose clamp on the radiator inlet hose at the thermostat.
7. Remove the radiator hose.
INSTALLATION PROCEDURE
