Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
10. Install the stabilizer shaft joints. Secure the stabilizer shaft joints using four nuts.
Tighten
^
Tighten the bolts which secure the stabilizer shaft joint to the strut assembly to 4 Nm (33 ft. lbs.).
^
Tighten the nuts which secure the stabilizer shaft joint bolts to the stabilizer shaft to 44 Nm (33 ft. lbs.).
11. Connect the strut assembly to the rear suspension knuckle using two nuts and two bolts.
Tighten
Tighten the mounting bolts to 142 Nm (105 ft. lbs.).
12. Install the brake line clip.
13. Connect the flexible hose (4) to the strut assembly (2).
Tighten
Tighten the brake pipe fitting to 15 Nm (11 ft. lbs.).
14. Install the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS.
15. Bleed the brake system. Refer to HYDRAULIC BRAKE SYSTEM BLEEDING in HYDRAULIC BRAKES.
16. Inspect the rear wheel alignment. Refer to MEASURING WHEEL ALIGNMENT in WHEEL ALIGNMENT.
