S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Parking Brake Cable: Service and Repair
Front Cable Replacement
Front Cable And Lever
REMOVE OR DISCONNECT
1. Raise vehicle and support with safety stands.
2. Right rear cable at equalizer.
3. Retainer.
4. Left side sound insulator panel.
5. Retainer and grommet.
6. Cable from lever.
7. Front cable.
Front Cable
INSTALL OR CONNECT
1. Front cable.
2. Retainer and grommet.
^
All retaining fingers must be completely through the hole.
3. Cable to lever.
4. Left side sound insulator panel.
5. Retainer.
6. Right rear cable to equalizer and nut.
^ Adjust Rear Parking Brake Cable.
7. Lower the vehicle.