S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Rear Cable Routing
5. Disconnect the cable from the parking brake lever at the rear axle.
6. Unclip the parking brake cables from the rear axle differential retainer.
Rear Cable Routing Bracket
7. Route the cables through the cable bracket.
8. Remove the rear parking brake cable assembly.
INSTALL OR CONNECT
1. Route the cables through the cable bracket.
2. Rear parking brake cable to lever.
3. Install the cable to the parking brake lever at the rear axle.
4. Clip the parking brake cables to the rear axle differential retainer.
5. Install the front cable at the equalizer.
6. Adjust Paring Brake Cable.
Without 4 Wheel Disc Brakes
Rear Cables, Straight Pull System