S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Clutch Slave Cylinder: Service and Repair
REMOVAL PROCEDURE
1. Remove the transmission.
2. Remove the clutch assembly.
3. Remove two bolts securing the concentric slave cylinder to the transmission and input shaft.
4. Remove the concentric slave cylinder from the input shaft.
INSTALLATION PROCEDURE
1. Install two bolts securing the concentric slave cylinder to the transmission and input shaft.
-
Tighten Concentric slave cylinder bolts to 9 Nm (80 inch lbs.).
2. Install the clutch assembly.
3. Install the transmission.
4. Check the clutch system for normal operation.
