S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
2. Rear dampener bolt and nut from the axle mount bracket.
3. Dampener frame mount bracket from the frame (if necessary).
INSTALL OR CONNECT
1. Dampener frame mount bracket to the frame (if removed).
-
Tighten:
-
Bolts to 46 Nm (34 ft. lbs.).
-
Nuts to 40 Nm (30 ft. lbs.).
2. Rear dampener bolt and nut to the axle mount bracket.
-
Tighten:
-
Bolt to 86 Nm (63 ft. lbs.).
-
Nut to 65 Nm (48 ft. lbs.).
3. Front dampener nut to the frame mount bracket.
-
Tighten nut to 100 Nm (74 ft. lbs.).
