S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Wiper Blade: Service and Repair
Rear
Description
Remove or Disconnect
1. Wiper blade assembly (12) from wiper arm assembly (8).
A. Push in button (A) of blade assembly clip (B) and move wiper blade assembly (12) out from inside radius of wiper arm assembly (8).
B. Move wiper blade assembly (12) up the wiper arm assembly (8) and away from vehicle endgate.
2. Squeeze wiper blade insert (13) retainer tabs (D) together and pull wiper blade insert (13) through wiper blade assembly (12) claws (E).
IMPORTANT: Blade insert must be replaced if removed.
Install or Connect
1. Wiper blade insert (13) to wiper blade assembly (12). A Slide wiper blade insert (13) through wiper blade assembly (12) claws (E) until wiper
blade Insert (13) retainer tabs (D) lock into claws (E).
2. Wiper blade assembly (12)to wiper arm assembly (8).
