S10/T10 P/U 2WD V6-262 4.3L VIN Z TBI (1995)
Compressor Clutch: Service and Repair
With HR100T/HR110MD Compressor
Clutch Rotor and/or Bearing
Remove or Disconnect
1. Remove the clutch plate and hub assembly as described previously.
Removing Rotor & Bearing Assembly Retainer Ring
2. Remove rotor and bearing assembly retaining ring, using Snap Ring Pliers J 6083.
Removing Clutch Rotor Assembly - Poly-Groove Drive
Pulley Rotor & Bearing Puller Installation