Silverado 1500 2WD V8-6.0L Hybrid (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
3. Install the park brake cable clip bolt (2).
Tighten the bolt to 22 Nm (16 lb ft).
4. Connect the park brake cable (1) to the rear axle housing cover clip.
5. Install the park brake cable to the cable guides.
6. Connect the right rear park brake cable (1) to the intermediate cable equalizer bar (2).
7. Insert the park brake cable conduit (3) into the frame bracket.
Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.
8. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling (See: Procedures/Parking Brake Cable Adjuster
Enabling) .
9. Adjust the park brake. Refer to Parking Brake Adjustment (Drum Brake) (See: Adjustments/Parking Brake Adjustment (Drum Brake))Parking
Brake Adjustment (Disc Brake) (See: Adjustments/Parking Brake Adjustment (Disc Brake)) .
