Silverado 1500 4WD V8-6.0L Hybrid (2009)
16. Install a new PIM cover seal (3).
Note
DO NOT use excessively abrasive cleaning tools on the sealing surface. Hand sanding with wet 400 grit sandpaper or use of a hand scraper is
recommended.
17. Clean the sealing surface of the PIM cover as necessary.
18. Position the PIM cover (2) onto the PIM ensuring the seal remains in place.
19. Install the PIM cover fasteners (1). Tighten the fasteners to 5 Nm (44 lb in) .
