Silverado 1500 4WD V8-6.0L Hybrid (2009)
7. Position the chassis harness ground wire (1) and the fuel tank fill pipe ground wire (2) to the frame bracket.
8. Install the fuel tank fill pipe ground wire (2) anti-rotation tab into the frame hole.
9. Install the fuel tank fill pipe ground wire bolt (3) and tighten to 9 Nm (80 lb in) .
10. Lower the vehicle.
11. Install the fuel tank filler housing.
12. Install the fuel tank filler housing to fuel tank fill pipe bolts and tighten to 2.3 Nm (20 lb in) .
13. Install the fuel tank filler housing to body TORX(R) screws (1) and pushpin retainer (2) and tighten the screws to 2.3 Nm (20 lb in) .
