Silverado 1500 4WD V8-6.0L Hybrid (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
2. Install a new pitman arm washer (2) and nut (1).
Tighten the nut to 250 Nm (184 lb ft).
3. Remove the steering gear from the vise.
4. Install the steering gear. Refer to Steering Gear Replacement (Two Mode Hybrid) (See: Steering Gear/Service and Repair)Steering Gear
Replacement (Non-Rack and Pinion) (See: Steering Gear/Service and Repair)Steering Gear Replacement (Rack and Pinion) (See: Steering
Gear/Service and Repair) .
5. Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment (See: Alignment/Service and Repair/Wheel
Alignment - Steering Wheel Angle and/or Front Toe Adjustment) .
