Silverado 2500 2WD V8-8.1L VIN G (2005)
9. Move the control valve assembly (4) sideways to disengage pin (1) in the manual selector valve (2) from the slot in detent lever (3). Remove the
control valve assembly (4).
Installation Procedure
1. Move the control valve assembly (4) into position under the main housing. Engage the pin (1) in the manual selector valve (2) into the slot in the
detent lever (3).
2. Align control valve assembly (1) with the dowel pins (2) in the main housing. Seat the control valve assembly against the main housing and hold it
in position.
3. Install one bolt marked (1) to hold the control valve assembly in place.
