Silverado 3500 2WD V8-8.1L VIN G (2005)
4. Install the park brake cable and the bolt to the lower shock absorber mount.
Tighten the bolt to 22 Nm (16 ft. lbs.).
5. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts.
6. Pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
7. Remove the safety stands.
8. Lower the vehicle.
w/Rear Drum
Park Brake Cable Replacement - Left Rear (w/Rear Drum)
Tools Required
^
J37043 Park Brake Cable Release Tool
Removal Procedure
