Sprint L3-61 1.0L (1988)
Brake Master Cylinder: Service and Repair
Master Cylinder Disassembly/Assembly
Exploded View Of Master Cylinder Assembly
Removing Circlip And Primary Piston
Removing Piston Stopper Bolt And Secondary Piston
Disassembly
1. Remove circlip.
CAUTION:Be cautious during removal as primary piston jumps out.
2. Remove primary piston by using compressed air.
3. Remove piston stopper bolt. Then remove secondary piston by blowing compressed air into hole from which piston stopper bolt was removed.