Suburban 2WD V8-5.3L (2008)
Notice: Refer to Fastener Notice.
2. Install the fuel line bracket nuts.
Tighten the bolt to 18 N.m (13 lb ft).
3. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
4. Install the fuel line clip to the bracket on the automatic transmission.
5. Install the fuel pipe bracket to the bellhousing stud.
6. Install the fuel pipe bracket nut.
Tighten the nut to 20 N.m (15 lb ft).
7. Lower the vehicle.
