Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
1. Install the seat cushion frame (5).
2. Install the bolts to the hinge assembly, if removed.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten to 7 N.m (61 lb in).
3. Install the seat cushion trim cover (8) and the pad (7).
Seat Cushion Heater Replacement - Rear
SEAT CUSHION HEATER REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the seat cushion trim cover.
2. Peel the seat cushion heater off of the pad.
3. Disconnect the seat cushion heater wiring harness.
INSTALLATION PROCEDURE
1. Connect the cushion heater wiring harness.