Tahoe 2WD V8-4.8L VIN V (2004)
3. Install the screw that retains the switch panel bezel (1) to the front door panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 2 N.m (18 lb in).
4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming.
Switch Replacement - Door Lock and Side Window - Passenger
SWITCH REPLACEMENT - DOOR LOCK AND SIDE WINDOW - PASSENGER
REMOVAL PROCEDURE
1. Remove the front door trim panel.
