Tracker 2WD L4-1.6L VIN 6 (2000)
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the hood hinge (4) to the vehicle by positioning the hinge according to the markings made on the cowl. Secure the hood hinge with the 2
bolts (5).
Tighten the hood hinge bolts to 27 N.m (20 lb ft).
2. Install the hood (1) to the hood hinge by positioning the hood according to the markings made on the hood. Secure the hood to each hinge (4) with
the 2 retaining bolts (3). Do not fully tighten the bolts.
3. Adjust the hood to air inlet grille clearance, the hood to headlamp clearance and the hood to front fender clearance. Refer to Body Panel
Adjustment (See: Adjustments) .
4. Turn the hood front bumpers (1) for vertical alignment.
Tighten the hood retaining bolts to 27 N.m (20 lb ft).
5. Remove the protective covers from the front fenders.
6. Lower the hood.