Tracker 2WD L4-1.6L VIN 6 (2000)
6. Remove the 2 screws (3) and rear seat recliner inside lower finish cover (2) from the seat back cushion (1).
7. Release the J-retainer (1) which secures each side of the rear seat back cushion cover.
8. Remove the seat back cushion cover (1) from the rear seat back cushion pad and frame (2).
Installation Procedure
1. Install the rear seat back cushion cover (1) to the rear seat back cushion pad and frame (2). Ensure that the cover is fully secured to the pad at the
velcro strips (3).