Tracker 2WD L4-1.6L VIN 6 (2000)
7. Use the camshaft timing sprocket bolt in order to secure the camshaft timing sprocket to the camshaft.
Notice: Refer to Fastener Notice in Service Precautions.
^
Tighten the camshaft timing sprocket bolt to 60 Nm (44 ft. lbs.).
8. Install the camshaft sensor housing (1) to the cylinder head.
^
Tighten the camshaft sensor housing bolts to 10 Nm (89 inch lbs.).
9. Install the camshaft sensor and ground wire to the cam sensor housing.
^
Tighten the camshaft sensor bolt to 10 Nm (89 inch lbs.).
10. Temporarily install the valve rocker arm cover.
11. Install the timing belt. Refer to Timing Belt Replacement.
12. Remove the valve rocker arm cover.
13. Adjust the valve lash. Refer to Valve Lash Adjustment.
14. Install the valve rocker arm cover. Refer to Valve/Rocker Arm Cover Replacement.
15. Install the crankshaft pulley. Refer to Timing Belt Replacement.
16. Connect the negative battery cable.
^
Tighten the battery cable to 15 Nm (11 ft. lbs.).
