Tracker 2WD L4-1.6L VIN 6 (2000)
15. Connect the following electrical connectors:
^
Exhaust Gas Recirculation (EGR) connector (4)
^
Manifold Absolute Pressure (MAP) sensor connector (1)
^
Engine ground wire (2) from intake manifold
16. Install the brake booster supply hose (3) to the intake manifold.
17. Connect the following electrical connectors:
^
Throttle Position (TP) Sensor (4)
^
Idle Air Control (IAC) Valve (3)
^
Engine Coolant Temperature (ECT) Sensor (2)
^
Evaporative emission canister purge valve
18. Install the EVAP canister purge valve vacuum hose.
19. Install the coolant hose to the throttle body (1).
