Tracker 2WD L4-1.6L VIN 6 (2000)
4. Loosen the power steering fluid reservoir hose clamp at the reservoir (6).
5. Remove the power steering fluid reservoir inlet hose (5) from the reservoir.
Installation Procedure
Notice: Refer to Installing Hoses Without Twists or Bends Notice in Cautions and Notices.
1. Install the power steering fluid reservoir inlet hose (5) to the reservoir (6).
2. Secure the hose to the reservoir with the hose clamp.
3. Install the power steering fluid reservoir inlet hose (3) to the steering gear housing.
4. Secure the hose to the steering gear housing with the hose clamp (4).
Notice: Refer to Using Proper Power Steering Fluid When Adding Notice in Cautions and Notices.
5. Add power steering fluid to the reservoir. Refer to Checking and Adding Power Steering Fluid.
Notice: Refer to Air In The Steering System Notice in Cautions and Notices.
6. Bleed the power steering system. Refer to Bleeding Power Steering System.
