Tracker 2WD L4-2.0L VIN C (1999)
Crankshaft Balancer: Service and Repair
Removal Procedure
^
Tool(s) Required
-
J 8614-01 Pinion Flange Holder
1. Remove the cooling fan drive belt.
2. Remove the accessory drive belt.
3. Remove the cooling fan.
4. Remove the radiator. Refer to Radiator Replacement in Cooling System.
Important: Do not damage the A/C condenser (if equipped) during crankshaft pulley service.
5. Remove the crankshaft pulley retaining bolt using the J 8614-01 to prevent crankshaft rotation when loosening the bolt.
6. The crankshaft may also be held by locking the flywheel through the access hole (1).