Tracker 4WD V6-2.5L VIN 4 (2001)
Spare Tire Carrier: Procedures
Removal Procedure
1. Remove the spare tire and wheel assembly.
2. Remove the 4 bolts (2) that retain the spare wheel carrier (1).
3. Remove the spare wheel carrier (1) from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the spare wheel carrier (1) to the vehicle.
Install the 4 bolts (2) that retain the carrier to the vehicle.
^
Tighten the bolts to 45 Nm (33 ft. lbs.).
2. Install the spare tire and wheel assembly.
