Tracker 4WD V6-2.5L VIN 4 (2001)
2. Apply oil to the camshaft lobes and journals.
3. Install the right timing chain to the camshaft sprockets by aligning the silver or yellow links (1) with the marks (2,3) on the camshaft sprockets.
4. Install the camshafts with the timing chain to the cylinder head.
5. Install the dowel pins (2) to the cylinder head.
6. Apply oil to the camshaft bearing cap bolts.
Notice: Refer to Bearing Cap Installation Notice in Service Precautions.
7. Install the camshaft bearing caps. The caps are marked intake or exhaust (1), position away from the timing chain (2), and direction toward the
timing chain (3).
8. Tighten the camshaft bearing caps.
Tighten the camshaft bearing caps in 3 progressive steps in the sequence shown to 12 Nm (8.5 ft. lbs.).
