Tracker 4WD V6-2.5L VIN 4 (2001)
6. Remove the 1 bolt and the condenser inlet tube (1) from the condenser.
7. Remove the condenser outlet tube (6).
8. Remove the upper 2 brackets from the condenser.
9. Remove the lower 2 bolts from the condenser.
10. Remove the upper radiator mounting bolts.
11. Tilt the top of the radiator towards the engine and slide the condenser out between the radiator and the front upper panel.
12. Tilt the top of the radiator towards the engine and slide the condenser fan out between the radiator and the front upper panel.
INSTALLATION PROCEDURE
