Tracker 4WD V6-2.5L VIN 4 (2001)
7. Install the condenser inlet tube (1). Secure with the bolt.
Tighten
Tighten the bolt to 25 N.m (19 lb ft).
8. Install the condenser fan to the condenser. Secure with the 4 nuts (3).
9. Connect the condenser fan electrical connector (2).
10. Connect the refrigerant pressure sensor electrical connector (1).
11. Evacuate and recharge the air conditioning system. Refer to Refrigerant Recovery and Recharging.
12. Operate the A/C system and test for refrigerant leaks. Refer to Leak Testing.
13. Install the front grille.
