Tracker 4WD V6-2.5L VIN 4 (2001)
4. Remove the tour nuts (1) retaining the intake surge tank (3).
5. Remove the two air inlet duct (4) fasteners (2) and remove the engine surge tank (3).
6. Loosen the hose clamps and remove the intake air inlet duct (4) from the throttle body.
7. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
8. Disconnect the Throttle Position (TP) sensor electrical connector.
9. Disconnect the two coolant hoses (1, 3) from the throttle body (2).
10. Disconnect idle air control (IAC) air hose from the top of the throttle body.
