Tracker 4WD V6-2.5L VIN 4 (2001)
1. Install a new throttle body gasket (1) onto the intake collector (2).
2. Connect the breather hose (2) to the throttle body (3).
3. Install the throttle body (3) onto the intake collector (1).
4. Slide the intake collector (1) forward and attach to the intake manifold.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Secure the intake collector to the intake manifold with the 2 bolts and 4 nuts.
Tighten
Tighten the fasteners to 23 N.m (16 lb ft).
6. Secure the throttle body to the intake collector with the 2 nuts and 2 bolts.
Tighten
Tighten the fasteners to 12 N.m (8.5 lb ft).
