Tracker 4WD V6-2.5L VIN 4 (2001)
Wiper Motor: Service and Repair
Wiper Motor Replacement - Rear
REMOVAL PROCEDURE
1. Remove the rear window wiper arm.
2. Remove the rear door trim panel seal. Refer to Water Deflector Replacement (2 Door) or Water Deflector Replacement (4 Door) in
Trunk/Liftgate.
3. Remove the 3 screws (1) which secure the rear window wiper motor (2) to the rear door (3).
4. Disconnect the rear window wiper motor electrical connector.
5. Remove the rear window wiper motor (2) from the rear door (3).
INSTALLATION PROCEDURE
1. Connect the rear window wiper motor electrical connector.
2. Install the rear window wiper motor (2) to the rear door (3). Secure the wiper motor with the 3 screws (1).
3. Install the rear door trim panel seal. Refer to Water Deflector Replacement (2 Door) or Water Deflector Replacement (4 Door) in Trunk/Liftgate.
4. Install the rear window wiper arm.