TrailBlazer 4WD L6-4.2L VIN S (2002)
16. This will allow the urethane adhesive to be separated from the window.
^
Leave a base of urethane on the pinchweld flange.
^
The only suitable lubrication is clear water.
^
Use J 24402-A, J 39032 or equivalent in order to remove the window.
17. Remove the bottom of the windshield from the urethane adhesive using a long utility knife or similar tool. Keep the cutting edge of the utility knife
against the glass. Do this from inside the vehicle.
18. With the aid of an assistant remove the windshield (1) from the vehicle.
