chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Exhaust Manifold Lower Heat Shield Replacement|Page 2861 > < Exhaust Manifold Lower Heat Shield Replacement|Page 2859
Page 2
background image

4. Remove the exhaust manifold heat shield bolts (1).
5. Remove the exhaust manifold heat shield, sliding the shield up over the HO2S pigtail.

Installation Procedure

1. Install the exhaust manifold heat shield, sliding the shield down over the HO2S pigtail.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the exhaust manifold heat shield bolts (1) and tighten to 10 Nm (89 lb in).

Exhaust Manifold Lower Heat Shield Replacement|Page 2861 > < Exhaust Manifold Lower Heat Shield Replacement|Page 2859