300 V6-3.5L (2008)
3. Install cylinder head cover bolts and tighten to 12 Nm (105 in. lbs.).
4. Install the ground strap retaining bolt (3) to the cylinder head cover.
5. Install the wire harness track (4).
6. Install the ignition coils (2). Tighten mounting screws to 6.7 N.m (60 in. lbs.).
7. Connect the ignition coil electrical connectors (2).
8. Install upper intake manifoldSee: Intake Manifold/Service and Repair/Intake Manifold - Installation.
9. Connect negative battery cable