300 V6-3.5L (2008)
9. Unthread return hose tube nut (1) from steering gear (2). Remove return hose from steering gear.
10. Unthread pressure hose tube nut (3) from steering gear (2). Remove pressure hose from steering gear.
11. Remove mounting screws, then heat shield (3) above each inner tie rod bellows (2).
12. Remove steering gear upper mounting bolt (4) and nut.
13. Remove steering gear lower mounting bolts (2 and 3).
14. Remove steering gear (1).
15. If necessary, remove outer tie rods from gear. Count number of revolutions off for each tie rod for reference upon installation to replacement gear.
Rear-Wheel-Drive
REAR-WHEEL-DRIVE
