Aspen 2WD V8-4.7L (2007)
CAUTION: During the installation of the replacement heating element, be careful not to fold or crease the element assembly. Folds or creases
will cause premature failure.
2. Connect the new heating element electrical connectors (1&2).
3. Connect the battery negative cable.
4. Verify heated seat system operation.
5. Install the appropriate seat cushion or seat back trim cover. Make certain the seat wire harness is correctly routed through the seat and seat back.
The excess wire between the cushion and back elements should be securely tucked between the rear of the cushion foam and the rear carpet flap of
the trim cover.