Cirrus V6-2.5L VIN H (1995)
1.
Loosen striker and set in the outboard and full up position. Soft torque screws to approximately 20 in.lbs.
2.
Slowly close door with outside handle pulled to open making sure striker enters latch opening. Push door in to full latched position with outside
handle in open position.
3.
Check overflush condition.
4.
Open door and tap in striker the required amount to flush door with a 2 lb. soft face mallet.
5.
If underflush, slam door hard to pull striker out. Repeat step to flush door.
6.
Final torque screws to 250 in.lbs.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-41-01-95 (One Door)
0.2 Hrs.
23-41-01-97 (Each Additional Door)
0.1 Hrs.
FAILURE CODE: XX - Service Adjustment
