Concorde V6-3.2L VIN J (2000)
Intake Manifold: Service and Repair
Lower Intake Manifold
WARNING: RELEASE FUEL SYSTEM PRESSURE BEFORE SERVICING SYSTEM COMPONENTS. SERVICE VEHICLES IN WELL
VENTILATED AREAS AND AVOID IGNITION SOURCES. NEVER SMOKE WHILE SERVICING THE VEHICLE.
REMOVAL
1. Perform fuel pressure release.
2. Drain cooling system. Refer to Cooling System for procedure.
3. Remove upper intake manifold.
4. Disconnect electrical connectors to fuel injectors and coolant temperature sensor.
Fig. 54
5. Disconnect heater and coolant bottle supply hoses from coolant tube at rear of intake manifold (Fig. 54).
6. Disconnect fuel supply hose from fuel rail.
7. Remove screw attaching fuel rail support bracket to the throttle body support bracket.
8. Remove bolts attaching fuel rail.
9. Remove fuel rail and injectors as an assembly.