Concorde V6-3.2L VIN J (2000)
Exhaust Resonator: Service and Repair
Muffler and Front Resonator
REMOVAL
1. Remove exhaust system. Refer to Exhaust system; service and repair.
2. Loosen clamp and separate rear resonator/pipe from muffler and front resonator.
INSTALLATION
1. Install rear resonator/pipe onto new muffler/ resonator, but do not tighten clamp until exhaust system is installed on vehicle.
2. Install exhaust system.
3. Tighten all exhaust band clamps to 61 Nm (45 ft. lbs.).
